Site moved to http://gnu-m68hc11.vacs.fr/
Submitted by Stephane.Carrez on Sat, 2016-01-23 15:41. Heads UpDue to low activity, the www.gnu-m68hc11.org site was moved to http://gnu-m68hc11.vacs.fr/
Fixing the rising edge of a 68HC11 output signal
Submitted by Stephane.Carrez on Sun, 2008-04-20 08:38. AdviseHardware or software problem? That's the question when your embedded board does not work as expected. Spotting the issue can be a challenge.
The article Fixing the rising edge of a 68HC11 output signal explains the hardware issue that I had, how I investigated it and finally solve the software issue which was the origin of the problem.
GCC HC11/12 and MCX11 / MCX12
Submitted by jmroux on Tue, 2007-02-13 01:04. News | ToolsI have ported the kernel MCX11 to MCX12 in order to use it with the MC9S12 microcontrollers family. Visit the GCC2MCX12 page at:
http://perso.orange.fr/jean-michel.roux/68HC12/gcc2mcx12.
GCC2MCX11 revision 3 is also available at:
http://perso.orange.fr/jean-michel.roux/68HC11/gcc2mcx11.
Fast and simple insert code into crt0.s
Submitted by imajeff on Fri, 2006-09-22 18:22. Advise | TricksSome time ago there was a question of the sort, "How do I make my own crt0.o file". Then the buzz started, and everyone was talking about how to do these things, including relocating RAM and other hardware configuration.
It seemed overly dificult to worry about things like finding the original crt0.s file (I've only found it burried in the GCC source code), and taking chances of changing too much so it didn't properly initialize RAM and such. Well, I have a solution where all I do is insert my startup code in a specific slot within the default crt0.s without having to edit that file!
What packages for the GNU development chain?
Submitted by Stephane.Carrez on Tue, 2006-08-01 21:54. AdviseAnswer the poll What kind of packages are you the most interested in for the GNU development chain?
and tell what is your prefered distribution.
meaning of blogs
Submitted by imajeff on Sat, 2006-07-22 16:50. AdviseI have wondered a while back what people were supposed to do with blogs. I had read that the name came from "Weblogs", which basically tells all that it is. In the past, I often had misc files where I log ideas or events for later referral. That's what a blog is. The only qestion I had then was; What happens after I start writing blogs?
Yesterday I found good beginner info about blogs and finaly decided to start my blog here.
The idea then is that if we all are blogging what we do with GCC, HC11/HC12, and implementation ideas, together we make a world of difference.
GCC 68HC11 and MCX11
Submitted by jmroux on Sat, 2006-04-08 20:50. News | ToolsThe kernel MCX11 can be used with GCC 68HC11. You can download the zip archive at:
http://perso.orange.fr/jean-michel.roux/68HC11/gcc2mcx11.
Seeking a terminal communcation GUI for 68HC11 to operate in Linux
Submitted by wtb1974 on Thu, 2006-03-16 20:49.Good day all,
I am seeking for a terminal communication similar to hyperterminal on windows.
Really appreciate it if someone could point me to the correct direction.
Thanks
wtb1974
Optimizing global variable accesses by using direct addressing mode
Submitted by Stephane.Carrez on Wed, 2006-03-15 21:58. AdviseThe 68HC11 and 68HC12 micro-controllers support a direct addressing mode that gives access to the lower 256 bytes of the address space. This addressing mode is sometimes called page0 addressing mode. It is optimized to produce short instructions in most cases: it only requires one byte to represent the address instead of two bytes for the extended address mode. The page0 addressing mode as well as the extended addressing mode are used in general to access global variables. The discussion explains how you can tune your applications to use this direct addressing mode.
Release 3.1 is available
Submitted by Stephane.Carrez on Sat, 2006-02-18 21:40. NewsRelease 3.1 of the GNU HC11/HC12 port is now available.
It is available as source and binary for GNU/Linux and Windows.
It contains the following fixes and improvements:
Gcc
* Upgrade to gcc 3.3.6
* Fix [bug #15493]: Code generation problem on 68HC12
* Fix [bug #13917]: Bug in gcc 3.0.1. Error with pre-decremented pointer array and -Ox switch
* Fix [bug #13879]: gcc gets a bus error upon compiling a file with -mshort and -O2
Gdb
* Upgrade to gdb 6.4
This is available on the following sites:
http://m68hc11.serveftp.org/m68hc11_port.php
http://www.gnu-m68hc11.org
and also on anonymous ftp server:
Recent comments
15 years 47 weeks ago
15 years 47 weeks ago
15 years 47 weeks ago
15 years 47 weeks ago
15 years 47 weeks ago
15 years 48 weeks ago
16 years 5 days ago
16 years 12 weeks ago
16 years 13 weeks ago
16 years 14 weeks ago